“Every KPFM technique operates on the same measurement paradigm: AC voltage is used to completely charge an AFM probe, thus producing a detectable electrostatic force for image acquisition,” explains Xiaoji Xu, assistant professor in Lehigh’s Department of Chemistry. “Overloading the probe with charges forces a limit on the spatial resolution, since the charges are not limited to the apex of the AFM probe. Instead, excess charges occupy the entire cantilever and contribute to the signal.”
Now, Xu and his graduate student Devon S. Jakob have introduced a new measurement paradigm based on the alignment on Fermi levels. While traditional KPFM methods produce images with a spatial resolution of 30 to 100 nanometers, the new Xu Research Group method, called Pulsed Force Kelvin Probe Force Microscopy (PF-KPFM), allows for less than 10 nanometer measurements of work function and surface potential in a single-pass AFM scan. Their findings have been published in an article in ACS Nano: “Pulsed Force Kelvin Probe Force Microscopy.” (Authors: Xiaoji Xu and graduate students Devon S. Jakob and Haomin Wang)
“In Pulsed Force Kelvin Probe Force Microscopy, we removed the need for the AC voltage by implementing a custom circuit of a field effect transistor between the tip and the sample, which acts as a binary switch,” says Xu. “When the switch is on, the circuit acts as a simple wire, allowing charges to pass between tip and sample. A small amount of charges spontaneously migrates between tip and sample based on the relative difference in their intrinsic Fermi levels. When the switch is off, the circuit does not allow for charges to pass, and acts as a capacitor to re-absorb the charges from the tip and sample region.”
The PF-KPFM also exclusively operates in the pulsed force mode, according to Xu. By using the pulsed force mode, he says, PF-KPFM measurements can be accurately obtained at very small tip-sample distances, where the electrical force is large, allowing for small sample heterogeneities to be revealed.
“The next logical step was to combine PF-KPFM with Peak Force Infrared (PFIR) microscopy, an infrared imaging technique invented in our lab, since both techniques use the pulsed force mode,” says Xu. “The resulting technique, named PFIR-KPFM, provides topographical, mechanical, chemical, and electrical information at < 10 nm nanometer spatial resolution.”
So, in addition to achieving significant improvements in measuring electrical potential in nanomaterials in a single-pass AFM scan, PF-KPFM can be combined with (PFIR) microscopy for high-throughput correlative measurements, according to the researchers. This follow-up study is described in an article, “Peak Force Infrared ‐ Kelvin Probe Force Microscopy,” forthcoming in Angewandte Chemie International Edition. (Authors: Xiaoji Xu, Devon S. Jakob and Haomin Wang from Lehigh University; Yong Yan, San Diego State University; Guanghong Zeng, Danmarks Nationale Metrologiinstitut, A/S, DENMARK; and Daniel E. Otzen, Aarhus Universitet, iNANO, Denmark.
“Pulsed force KPFM is the first KPFM technique to truly implement the pulsed force mode of AFM for nanoscale surface potential characterization, and the first KPFM technique to be combined with simultaneous infrared detection in the same scan,” says Xu.
The importance of accurately measuring the nanoelectrical properties of materials is far-reaching in both academia and industry, according to the researchers. Due to the increasingly smaller size of semiconductor devices, PF-KPFM may be especially helpful for technology companies, as the high spatial resolution of PF-KPFM reveals features that are too small for other KPFM techniques. Similarly, they say, PFIR-KPFM will be beneficial in revealing the correlations between chemical heterogeneity, structure and electrical properties of lab-made solar cell components.
“Ultimately,” says Xu, “we hope that our invention will open the door for characterization of new materials, and help pave the way for more efficient energy-related devices.”
Xu’s research group develops new methods and instruments for chemical measurement and imaging at the nanoscale with < 10 nm spatial resolution. They employ two infrared nanoscale imaging methods invented by Xu: peak force scattering-type near-field optical microscopy (PF-SNOM) and peak force infrared (PFIR) microscopy. These techniques empower researchers to study previously inaccessible nanoscale objects with multimodal spectroscopic information close to the lower limit of spatial scale.
Xu was named a2020 Sloan Research Fellow. This prestigious award, funded by the Alfred P. Sloan Foundation, places Xu among “the most promising scientific researchers working today.” Additionally, he was named a Beckman Young Investigator, earning a prestigious grant awarded by the Arnold and Mabel Beckman Foundation for “the most promising young faculty members in the early stages of their academic careers in the chemical and life sciences.”
The research in the two articles received support from the National Science Foundation and the Arnold and Mabel Beckman Foundation.
